Applicator for applying windshield primers and accelerators to both glass and sheet metal surfaces when replacing windshields.
Features:
* Length: 130 mm
* Material: superlon/steel
Use:
1. Protective equipment
Always use adequate protective measures when handling adhesives, such as protective gloves suitable for polyurethane adhesives. Also pay attention to the ventilation of gases released from the adhesive, i.e. possible respiratory protection.
2. Surface preparation
Surfaces must be clean, dry and free of grease, oil, dust or impurities.
3. Application
Wet the applicator with primer and softly roughen the surfaces according to the manufacturer's instructions.
4. Stain removal
Undried primer can be removed from tools and equipment with a suitable solvent. Once dried, the product can only be removed mechanically.
Hands and other contaminated skin should be cleaned immediately with soap and water.
5. Drying
Drying time is approximately 10-15 minutes, depending on temperature.
Toimitus
Tuote voidaan toimittaa seuraavilla toimitustavoilla.
